Request a Quote
0

2.5G SFP Optical Transceivers

2.5G SFP (2500BASE-X)

2.5Gbps (2500BASE-X) SFP optical transceiver for single-mode/multi-mode fiber ideal for mobile backhaul, GPON/access and industrial Ethernet.

Product Specifications

Part NumberData RateInterfaceReachWavelength or CableOutput PowerReceiver SensitivityOperating TemperatureRemarksInquiry
SJ8525-X3ATXX2.5GLC SFP DDM300 m850 nm-3 to -9 dBm-17 dBm0 ~ 70°C—Inquiry
SJ8525-X3ATXX-WT2.5GLC SFP DDM300 m850 nm-2.5 to -9 dBm-15 dBm-40 ~ 85°C—Inquiry
SJ1325-02ATXX2.5GLC SFP DDM2 km1310 nm-3 to -9 dBm-18 dBm0 ~ 70°C—Inquiry
SJ1325-02ATXX-WT2.5GLC SFP DDM2 km1310nm-3 to -9.5 dBm-18 dBm-40 ~ 85°C—Inquiry
SJ1325-15ATXX2.5GLC SFP DDM15 km1310 nm DFB0 to -5 dBm-18 dBm0 ~ 70°C—Inquiry
SJ1325-15ATXX-WT2.5GLC SFP DDM15 km1310 nm DFB0 to -5 dBm-20 dBm-40 ~ 85°C—Inquiry
SJ1325-40ATXX2.5GLC SFP DDM40 km1310 nm DFB3 to -2 dBm-28 dBm0 ~ 70°C—Inquiry
SJ1325-40ATXX-WT2.5GLC SFP DDM40 km1310nm DFB3 to -2 dBm-28 dBm-40 ~ 85°C—Inquiry
SJ1525-40ATXX2.5GLC SFP DDM40 km1550nm DFB3 to -2 dBm-20 dBm0 ~ 70°C—Inquiry
SJ1525-40ATXX-ET2.5GLC SFP DDM40 km1550 nm DFB3 to -2 dBm-20 dBm-20 ~ 85°C—Inquiry
SJ1525-80ATXX2.5GLC SFP DDM80 km1550nm DFB3 to -2 dBm-28 dBm0 ~ 70°C—Inquiry
SJ1525-80ATXX-ET2.5GLC SFP DDM80 km1550 nm DFB3 to -2 dBm-28 dBm-20 ~ 85°C—Inquiry
SJ1525-00ATXX2.5GLC SFP DDM100 km1550 nm DFB5 to 0 dBm-28 dBm0 ~ 70°C—Inquiry
SJ1525-00ATXX-WT2.5GLC SFP DDM100 km1550nm DFB5 to 0 dBm-28 dBm-40 ~ 85°C—Inquiry
SJ1525-12ATXX2.5GLC SFP DDM120 km1550 nm DFB6 to 1 dBm-30 dBm0 ~ 70°C—Inquiry
SJ1525-12ATXX-ET2.5GLC SFP DDM120 km1550 nm DFB5 to 0 dBm-30 dBm-20 ~ 85°C—Inquiry
SJ1525-16ATXX2.5GLC SFP DDM160 km1550nm DFB8 to 5 dBm-30 dBm0 ~ 70°C—Inquiry
SJ1525-16ATXX-ET2.5GLC SFP DDM160 km1550 nm DFB6 to 3 dBm-32 dBm-20 ~ 85°C—Inquiry

Related Product Series

SFP Optical Transceivers

10G SFP+ Optical Transceivers

100BASE SFP Transceivers

Product Inspection and Compatibility FAQ

Sanoc QA Manager Lin Yi-Kung explains the principles used for inspection, standards and compatibility review.

How is suitability for a specified device confirmed?
Provide the complete device model, port, software or firmware version, protocol and exact part number. Compatibility results apply only to the validated device, software, port and part-number combination.
What inspections are performed before shipment?
After production and before shipment, SANOC performs FQC and OQC inspections according to the product, lot size, and applicable sampling plan. OQC includes a pre-shipment visual inspection. Inspection items, sample quantities, and available quality documentation are confirmed based on the product and order requirements.
Does compliance with IEEE, SFF or MSA mean compatibility with every device?
No. These standards define basic interfaces, form factors, pin assignments and data formats. Actual compatibility must still be checked against the device, port, software or firmware version, protocol and module part number.
Is an established link enough to proceed directly with deployment?
Not by itself. Before deployment, check transmit and receive optical power, DDM/DOM alarms, temperature, link loss and compatibility with the target platform.
How should a part number be selected from the product specification table?
Compare data rate, reach, wavelength or cable, interface, transmit power, receiver sensitivity and operating temperature. Do not infer values that are not listed; request the Datasheet for the exact part number when complete conditions are required.

Need help selecting or verifying compatibility?

Send us the device model, application requirements, and quantity to discuss suitable products, a quote, and lead time. If you already have a part number, please include it.

Request a Quote